Removing and Replacing the Cooling Fan
To remove the cooling fan:
1.
Perform the cover removal procedure. Refer to “Removing and Replacing the
Cover” on page 26.
2.
Disconnect the power supply connector (J2) (
1
in Figure 14) between the
power supply and the cooling fan.
3.
Remove the two screws, lockwashers, and nuts
2
that secure the cooling fan
to the rear of the 7208 Tape Drive.
4.
Lift the cooling fan out of the 7208 Tape Drive.
To replace the cooling fan, reverse the removal procedure. Make sure that the
cooling fan is oriented so that air flows out from the rear of the 7208 Tape Drive.
Figure 14. Removing and Replacing the Cooling Fan
30
7208 Model 345 Service Guide
Summary of Contents for 7208 345
