IBM 6565 - PC 300 PL, User Manual

Page: 44 / 190

Using a CD-ROM drive
Some models have a preinstalled CD-ROM drive. CD-ROM drives can play
back or read from a CD, but cannot write information to it. CD-ROM
drives use industry standard, 12 cm (4.75-inch) CDs.
Follow these guidelines when using a CD-ROM drive:
Ÿ
Do not place the drive where there is:
– High temperature
– High humidity
– Excessive dust
– Excessive vibration or sudden shock
– An inclined surface
– Direct sunlight
Ÿ
Do not insert any object other than a CD into the drive.
Ÿ
Before moving the computer, remove the CD from the drive.
Handling a CD
When handling a CD, follow these guidelines:
Ÿ
Hold the CD by its edges. Do not touch the surface of the side that is
not labeled.
Ÿ
To remove dust or fingerprints, wipe the CD with a clean, soft cloth
from the center to the outside. Wiping the CD in a circular direction
might cause loss of data.
Ÿ
Do not write or stick paper on the CD.
Ÿ
Do not scratch or mark the CD.
Ÿ
Do not place or store the CD in direct sunlight.
Ÿ
Do not use benzene, thinners, or other cleaners to clean the disk.
Ÿ
Do not drop or bend the CD.
Loading a CD
To load a CD into a CD-ROM drive:
1. Press the eject/load button. The tray slides out of the drive. (Do not
manually force the tray open.)
2. Place the CD in the tray with the label facing up.
3. Close the tray by pressing the eject/load button or by gently pushing
26
PC 300PL and PC 300GL User Guide