IBM 6565 - PC 300 PL, User Manual

Page: 123 / 190

Code Description Action
162 A change in device
configuration occurred 1. Verify that all external
devices are turned on.
2. Verify that all devices are
properly installed and
securely connected.
3. If you added, removed, or
changed the location of a
device, you must save the
new configuration in the
Configuration/Setup
Utility program. See
“Starting the
Configuration/Setup
Utility program” on
page 97 and Chapter 4,
“Using the
Configuration/Setup
Utility program” on
page 39 for more
information.
163 Date and time incorrect 1. Reset date and time in the
Configuration/Setup
Utility program.
2. If problem persists, have
the computer serviced.
164 CMOS RAM memory size does
not match 1. Refer to “Memory
problems” on page 117.
2. If problem persists, have
the computer serviced.
166 Boot block check sum error Have the computer serviced.
167 No processor BIOS update
found Update the BIOS. See
“Updating system programs”
on page 35.
168 Alert on LAN is not working
correctly. 1. Go to Chapter 4, “Using
the Configuration/Setup
Utility program” on
page 39 and follow the
instructions to verify that
Alert on LAN is enabled.
2. If Alert on LAN is enabled
and you still get this error
code, have the computer
serviced.
175 System board error Have the computer serviced.
176 System cover has been
removed. Type in the administrator
password. If problem persists,
have the computer serviced.
Chapter 6. Troubleshooting
105