IBM 5887, Manual

Page: 21 / 92

Figure 6. Docking the ESM units
d. For one ESM at a time, place your thumbs on the tips of the terracotta ESM levers and swing the
levers into their fully closed and latched position.
Figure 7. Closing the ESM release levers
10. Dock and secure the power supplies by completing the following steps:
a. Moving one power supply at a time, slide the unit approximately 75 mm (3 in) away from the
chassis.
Installing the 5887 disk drive enclosure or setting up a preinstalled 5887 disk drive enclosure 7