IBM 4957-J11 Hardware Installation And Maintenance Manual Download

Page: 14 / 104

CAUTION: The weight of this part or unit is more than 55 kg (121.2 lb). It takes specially trained

persons, a lifting device, or both to safely lift this part or unit. (C011)

Environmental notices

This information contains all of the environmental notices for IBM Systems products in English and other

languages.
The IBM Systems Environmental Notices information includes statements on limitations, product

information, product recycling and disposal, battery information, flat panel display, refrigeration and

water-cooling systems, external power supplies, and safety data sheets.

Electromagnetic Compatibility Notices

Class A Notices
The following Class A statements apply to IBM products and their features unless designated as

electromagnetic compatibility (EMC) Class B in the feature information.
When attaching a monitor to the equipment, you must use the designated monitor cable and any

interference suppression devices supplied with the monitor.

Canada Notice
CAN ICES-3 (A)/NMB-3(A)

xiv IBM Cloud Object Storage System: Medium/Large J11/J12 Disk Enclosure Hardware Installation and

Maintenance Manual

Summary of Contents for 4957-J11









































































































Search results

Summary of Contents for 4957-J11

Reviews:

Related manuals for 4957-J11

Brands by name

Popular brands

IBM 4957-J11, Hardware Installation And Maintenance Manual

Search results

Summary of Contents for 4957-J11

Reviews:

Related manuals for 4957-J11

Brands by name

Popular brands