IBM 4348, Installation Manual

Page: 30 / 90

v
SATA 0 and SATA 1 connectors are hard disk drives connectors and SATA 2 and
SATA 3 connectors are optical drive connectors.
v The electromagnetic interference (EMI) integrity and cooling of the server are
protected by having all bays and PCI or PCI Express slots covered or occupied.
When you install a drive or PCI or PCI Express adapter, save the EMC shield
and filler panel from the bay, or the PCI or PCI Express adapter slot cover in the
event you later remove the drive or adapter.
v For a complete list of supported optional devices for the server, see
http://www.ibm/com/servers/eserver/serverproven/compat/us/.
Installing a DVD drive
To install a DVD drive in bay 1 or 2, complete the following steps:
1. Read the safety information that begins on page v and “Installation guidelines”
on page 7.
2. Turn off the server and peripheral devices, and disconnect the power cords
and all external cables.
3. Remove the side cover (see “Removing the side cover” on page 10).
4. Remove the bezel (see “Removing the bezel” on page 11).
5. Use your fingers to press in on the drive-bay filler panel release tab on the
inside of the bezel and remove it from the bezel; then, pry the EMC shield
away from the server. Store the filler panel and EMC shield in a safe place.
Release tab
16
System x3100 Type 4348: Installation Guide