Hot Swap Tray (FRU No. 06H8631,
07H0774)
Notes
1. The following trays are shown with drives
installed.
2. Each hot-swap drive installed must have a Hot
Swap Drive Tray attached.
The Hot Swap Drive Tray for the expansion enclosure has
a small switch that stops the movement of the disk drive.
The tray also provides two LEDs (one green and one
amber) to indicate the current state of the drive and tray.
The following table summarizes the LED states on the
hot-swap tray and their meanings.
Locked
Position
Green
Light
Amber
Light
Power-Off
Switch
Unlocked
Position
Green
Amber
Description
On
Off
The Drive tray is powered on; the
hard disk drive is inactive; and the
drive should
not be removed.
Blinking
Off
The hard disk drive is inactive.
The hot-swap drive can be
removed safely.
On
On or
Blinking
The hard disk drive is in use, and
should
not be removed.
Off
Off
The drive is defective, or no power
is being supplied to the drive. The
hot-swap drive can be removed
safely.
10
PC Server HMM
