IBM 3301690 User Manual Download Page 126

Page: 126 / 176

3301690 CPU Card

6.1

Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product and

is subject to change without prior notice. You may visit the GAI website

(

www.globalamericaninc.com

) or contact technical support for the latest

updates.

The 3301690 CPU card has four software drivers:

„

Intel chipset driver

„

Intel Graphics Media Accelerator driver

„

Marvell gigabit Ethernet controller driver

„

RealTek AC’97 Audio CODEC driver

All four drivers can be found on the CD that came with the CPU card. To install the drivers

please follow the instructions in the sections below

6.2

Chipset Driver Installation

To install the chipset driver, please follow the steps below:

Step 1:

Insert the CD into the system that contains the 3301690 CPU card. Open the

CD folder and locate the icon for the

infinst_autol.exe

installation file. Once

located, use the mouse to move the cursor over the icon and double click the

mouse button.

Step 2:

Once you double click the

infinst_autol.exe

icon, the screen shown in

Figure

6-1

should appear.

126

Summary of Contents for 3301690

















































































































































































Search results

Summary of Contents for 3301690

Reviews:

Related manuals for 3301690

Brands by name

Popular brands

IBM 3301690, User Manual

Search results

Summary of Contents for 3301690

Reviews:

Related manuals for 3301690

Brands by name

Popular brands