IBM 325 8639, Hardware Maintenance Manual

Page: 76 / 145

Ÿ
If you do not have an EISA Configuration Utility
program or the Configuration/Setup Utility ISA Legacy
Resources option go to “Manual I/O Address and
Interrupt Assignment” on page 72.
EISA Configuration Utility:
1. Load the EISA Configuration Utility program.
2. Select Step 2 from the main menu to add the adapter
and create the CFG file.
3. Display the available I/O addresses. Refer to the list
in the table on page 70 and “Configuration
Considerations:” on page 70, and assign I/O
addresses for the adapter ports.
4. Display the available interrupts.
5. Refer to the list in the table on page 70, and assign
interrupts for the adapter ports.
6. Enter the assigned I/O addresses and interrupts on
the Configuration Data Worksheet on page 72.
7. Follow the on-screen prompts to exit the utility
program.
Go to “Adapter Configuration:” on page 72.
Configuration/Setup Utility ISA Legacy
Resources:
1. Restart the system and run the Configuration/Setup
Utility.
2. Select the ISA Legacy Resources option.
3. Select I/O Port Resources.
4. Refer to the list in the table on page 70 and
“Configuration Considerations:” on page 70, and
reserve I/O addresses for the adapter ports.
5. Enter the reserved I/O addresses on the
Configuration Data Worksheet on page 72.
6. Select Interrupt Resources.
7. Refer to the list in the table on page 70, and reserve
interrupts for the adapter service processor port and
the two adapter COM ports.
8. Enter the reserved interrupts on the Configuration
Data Worksheet on page 72.
9. Follow the on-screen prompts to exit the
Configuration/Setup Utility.
Go to “Adapter Configuration:” on page 72.
PC Server 325 - Type 8639
71