manualshive.com logo in svg

IBM 2196, User Manual

Share
Download
IBM 2196 User Manual Download Page 77

BIOS Setup configuration 

6-3

Some of the parameters and related settings in Setup are for reference only, such 
as those items in the System Summary and Product Data menus. Refer to the 
section “Viewing system information and product data” on page 6-5 for details on 
these menus.

The configurable options allow you to control how your computer operates. For 
example, you can use Setup to:

• Configure hard disk, CD-ROM, or any other IDE drives

• Select and configure I/O devices, such as serial, parallel, USB, and video 

devices

• Enable, disable, or configure the power-management modes

• Customize startup options

• Set date and time

• Create or change a power-on password

• Enable or disable cache options and ROM shadowing

• Set resource assignments for PCI adapter cards and other system devices

• Load Setup default settings

Summary of Contents for 2196















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands