manualshive.com logo in svg

IBM 2196, User Manual

Share
Download
IBM 2196 User Manual Download Page 68

4-12

IBM Personal Computer User Guide

There are seven color-coded Rapid Access buttons positioned across the top of the 
keyboard. Some of these buttons are preset to start certain programs on your 
computer. The preset functions are printed on the label above the buttons. You can 
keep these settings, or customize five of the buttons to start any program or file you 
want. For example, if you enjoy playing Solitaire, you can customize a Rapid Access 
Button to open the Solitaire program. The Help and Standby buttons are 
permanently programmed. 

To customize a Rapid Access Button:

1. From the windows desktop, click Start.

2. Select Settings, and then click Control Panel.

3. Double-click Keyboard (Rapid access). The Rapid Access Keyboard 

Customization program starts.

4. Follow the instructions on the screen.

To learn more about the Rapid Access keyboard, click Help.

Summary of Contents for 2196















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands