IBM 2109 Model M12, User Manual

Page: 13 / 97

Safety and environmental notices
Safety notices are printed throughout this document.
A danger notice indicates the presence of a hazard that has the potential of causing
death or serious personal injury.
A caution notice indicates the presence of a hazard that has the potential of causing
moderate or minor personal injury.
An attention notice indicates the possibility of damage to a program, device,
system, or data.
For translations of danger notices and caution notices, see Appendix C, “Danger
and caution notice translations”, on page 27. The notices are listed in numeric order
based on their IDs, which are displayed in parentheses at the end of each notice.
See the following examples of danger notices and caution notices for the location of
the ID numbers.
DANGER
To prevent possible electrical shock during an electrical storm, do not
connect or disconnect cables or station protectors for communications
lines, display stations, printers, or telephones. (1)
CAUTION:
A lithium battery can cause fire, explosion, or a severe burn. Do not recharge,
disassemble, heat above 100°C (212°F), solder directly to the cell, incinerate,
or expose cell contents to water. Keep away from children. Replace only with
the part number specified for your system. Use of another battery may
present a risk of fire or explosion. The battery connector is polarized; do not
attempt to reverse the polarity. Dispose of the battery according to local
regulations. (1)
Safety label checks
Perform the following safety label checks:
1. Verify that the safety label shown in Figure 1 on page xii is installed on the 2109
Model M12.
© Copyright IBM Corp. 2002, 2003
xi