background image

IBM System Storage DCS9900 1269-3S2 Storage Expansion Unit Installation, Service, and  User Guide

                                              

xi

Figure  P-10  

 

I/O Module Caution Label (Do not operate with modules missing)

Figure  P-11  Drive Carrier Module Caution Label (Drive Spin down time 30 seconds)

• Do not operate with modules missing.

Class 1 Laser Product

When the product is supplied with optical modules, it contains a laser that complies with Laser Class 1, 
US 21 QFR (J) & EN 60825-1, UL (NRTL) and TUV.

Caution !

If optical modules are to be provided and fitted by the end user, the modules must be a UL (or 
other North American NRTL) RECOGNISED COMPONENT, must be approved by TUV (or 
other European Product safety test house), and the laser in the module must comply with 
Laser Class 1, US 21 QFR (J) & EN 60825-1.

Important !

Observe all applicable safety precautions (for example, weight restrictions, handling 

batteries and lasers etc.) detailed in the preceding paragraphs when dismantling and 
disposing of this product or its components.

European Regulations

This equipment complies with European Regulations EN 55022 Class A: Limits and Methods of 
Measurement of Radio Disturbance Characteristics of Information Technology Equipments and 
EN50082-1: Generic Immunity.

Special Tools and Equipment

There are no special tools required, but in order to complete the assembly of some configurations, you 
may need the following (not supplied):

• Security keys (one of these should be included with your IBM System Storage DCS9900 3S2 

Storage Expansion Unit for use with the drive locks).

Electronic Emission Notices 

The following statements apply to this product. The statements for other products intended for use with 
this product will appear in their accompanying manuals.

Summary of Contents for 1269-3S2














































































Reviews: