IBM 1269-3S2, Installation, Service And User Manual

Page: 27 / 77

Introduction
11
1.5.7 Interfaces
1.5.8 EBOD Module Specification
1.5.8.1 LED Functions
Table 1–4 LED Functions
1.5.9 Drive Carrier Module Specification
Please contact your supplier for details of approved drives.
Important Operating SAS 16-bay drive enclosure subsystems with non-approved drives may invalidate the
warranty.
Drive support drive carrier specification
Attachment • 1 x SAS 4 lane 3Gb wide port Host connector
• 1 x SAS 4 lane 3Gb wide port Expansion connector
Dimensions
(internal)
103mm x 267mm (4 inches x 10.5 inches)
– component board area: 103mm x 240mm (4 inches x 9.5 inches)
Mounting rear, single bays 3 and/or 4 ( Figure 1–2 )
Connectors • Host Port:
– 1 x SFF8470 connector (4 lane)
• Expansion Port:
– 1 x SFF8470 connector (4 lane)
LED Functions State Description
Phystate Green On
Flashing
Off
Ready
Active
Not Ready
System Health Red
Green
Flashing Red
Fault
Good
POST
Module Dimensions Height 29.1mm Width 106.55mm Depth 251 mm
Weight 0.98kg (1.0” 36Gb drive)
Operating Temperature 5° C to 40° C (when installed in an system enclosure with dual Power
Supply/Cooling Modules)
Power Dissipation 19 Watts maximum
LEDs – Drive Installed/Activity
– Drive Fault