IBM 084, Installation And User Manual

Page: 46 / 78

Table 6. Ops panel LED descriptions (continued)
Display/LED
Description
Drawer 1 Fault LED Amber if there is a drive, cable, or sideplane fault in
drawer 1. Open the drawer and check the disk
drive LEDs for faults.
Drawer 2 Fault LED Amber if there is a drive, cable, or sideplane fault in
drawer 2. Open the drawer and check the disk
drive LEDs for faults.
Drawer LEDs
The following figure shows the names and locations of the disk drawer LEDs.
Figure 24. Drawer LEDs (left sideplane only)
Table 7. Drawer LED descriptions
LED
Description
Sideplane OK/Power Good Green if the sideplane card is working and there are no power
problems.
Drawer Fault Amber if a drawer component has failed. If it is a drive that has failed,
an amber LED lights up on the failed drive; follow the procedure in
"Replacing a Disk Drive in Carrier (DDIC)." If the drives are functioning
correctly, contact your storage vendor to identify the failure.
Logical Fault Amber if there is a drive fault.
Cable Fault Amber if the cabling between the drawer and the back of the
enclosure has failed. Contact support to resolve the problem.
32 IBM ESS expansion: Installation and User Guide - Model 084