IBM 084, Installation And User Manual, Page: 27 / 78

The following hard disk drives are supported:
• 3.5” 7200rpm SAS drive
The following solid state drives are supported:
• 2.5” SAS solid state drive with 3.5” adapter
Note: SSD drives are supported only for logtip backup. For details, see Spectrum Scale RAID
Administration.
The drive carrier has a single amber LED which is lit when the drive has a fault.
Operator’s panel
The front of the enclosure features an operator’s (ops) panel (shown in Figure 2–6) on the left-hand side
which contains the following:
• Unit Identification Display.
• Mute/Input button.
• Power On/Standby LED (green/amber).
• Module Fault LED (amber).
• Logical Status LED (amber).
• Drawer 1 Fault LED (amber).
Chapter 2. System overview 13