IBM 000E9283, Handbook

Page: 22 / 226

Table 4. PCIe adapters supported in the 9008-22L, 9009-22A, or 9223-22H system (continued).
Feature
code Description
EN0V PCIe2 LP 4-port (10 Gb + 1 GbE) Copper SFP+RJ45 Adapter (FC EN0V; CCIN 2CC3); Adapter FRU
number: 00E2715
EN0X PCIe2 LP 2-port 10 GbE BaseT RJ45 Adapter (FC EN0X; CCIN 2CC4); Adapter FRU number: 00E2714
EN0Y PCIe2 LP 8 Gb 4-port Fibre Channel Adapter (FC EN0Y; CCIN EN0Y); Adapter FRU number: 74Y3923
EN1B PCIe3 8x 2-port Fiber Channel (32 Gb/s); (FC EN1A and EN1B - RP EL5V and EL5U; CCIN 578F);
Adapter FRU number: 01FT703
EN1D PCIe3 8x 4-port Fiber Channel (16 Gb/s); (FC EN1C and EN1D - RP EL5W and EL5X; CCIN 578E);
Adapter FRU number: 01FT698
1
Adapter is only supported on the 9008-22L.
Managing PCIe adapters for the 9009-41A, 9009-42A, or 9223-42H
system
Find information about using and managing the Peripheral Component Interconnect Express (PCIe)
adapters that are supported for the IBM Power System S914 (9009-41A), IBM Power System S924
(9009-42A), or IBM Power System H924 (9223-42H) servers. Also, find information about specifications
and installation notes for specific adapters.
Overview of managing PCIe adapters for the 9009-41A, 9009-42A, or 9223-42H
system
Find information about using and managing Peripheral Component Interconnect Express (PCIe) adapters.
The following features are electromagnetic compatibility (EMC) Class B features. See the Class B Notices
in the Hardware Notices section.
Table 5. Electromagnetic compatibility (EMC) Class B features
Feature Description
5748 POWER GXT145 PCI Express Graphics Accelerator
5785 4 Port Async EIA-232 PCIe adapter
EN0W PCIe2 2-port 10 GbE BaseT RJ45 adapter
The adapter information that is shown here is used during non-directed service activities. The
information can be used to:
v Identify an adapter
v Find specific technical information about an adapter
v Where applicable, show special installation or cabling instructions
v Show signal names for the output-pins of the adapter connectors
v Where applicable, show the settings for switches or jumpers
Adapters can be identified by their feature code (FC) or their custom-card identification number (CCIN).
Normally, the CCIN number is labeled on the adapter. The field replaceable unit (FRU) part number
(P/N) of your adapter might not match the FRU P/N listed in this information. If the part numbers do
not match, verify that the CCIN is the same. If the CCIN is same, the adapter has the same function and
can be used in the same way.
Adapters must be placed in specific PCI Express (PCIe) slots to function correctly or optimally.
6
Managing PCIe adapters