IBIX 25, Use And Maintenance Manual

Page: 48 / 58

47
8.7 GENERAL INFORMATION
The IBIX ECO BLASTERS can be fitted with a device enabling to use spray water to abate any dust
produced during work, especially when highly volatile blasting materials are used to carry out extremely
delicate cleaning of porous and/or severely damaged stone materials, also in historical buildings.
The device consists of a tap/mixer kit integral with the main air control valve and directly operated by the
spray gun trigger, and of a mixer-sprayer nozzle fitted to the gun end part to form an integral part of the
nozzle.
The device uses water straight out of the water mains; after installation, it is directly controlled by the spray
gun trigger like in standard machines.
IF THE KIT IS NOT ORIGINALLY INSTALLED ON THE MACHINE BUT IS RETROFITTED
AT A LATER STAGE, INSTALLATION MUST BE CARRIED OUT BY QUALIFIED
PERSONNEL AT AN AUTHORISED AFTER-SALES CENTRE!
8.8 INSTALLATION
–
Install the female part of the 3/4" quick lock (A) to connect the pipe used to feed water to the machine
(not included in the standard supply) to the water mains.
–
Cause the two couplings to engage by applying a light pressure until a click noise is heard indicating
that the two couplings have engaged.
Install the mixer nozzle on the gun nozzle holder ring as shown here below, then tighten the two locking
screws
(B) with a screw driver and connect the black water delivery Rilsan pipe (C) to its special pipe
holder (D) by applying pressure with your fingers (E) .
A
B
C
D E