IBIX 25, Use And Maintenance Manual

Page: 20 / 58

19
3 DANGERS AND PROTECTION
3.1 NOT PERMITTED AND NOT RECOMMENDED USES
The IBIX eco-blaster should be used for the applications recommended by the manufacturer (please see
chapter 2).
In particular, the system should not be even partially used:
- without its protective guards and/or with cut-off, faulty or missing safety devices;
- if it has not been correctly installed;
- in an explosive atmosphere or wherever there is a fire risk;
- to work materials with characteristics different from the specified ones;
- in dangerous conditions or in the event of machine malfunction;
- for uses not recommended for the machine or by untrained personnel;
- for uses against the applicable standards;
- in case of severely inadequate maintenance;
- after carrying out unauthorised modifications or repairs;
- in total or partial disregard of the given instructions.
A SPECIFIC WRITTEN DECLARATION BY IBIX IS NECESSARY FOR ANY
DEROGATION TO THE INDICATIONS LISTED ABOVE.
Any modification not explicitly authorised by the manufacturer that modifies the
predicted functionality and the risks and/or creates additional risk, will be the full
responsibility of the person performing.
Any modifications carried out without the manufacturer’s authorisation, also
imply the
loss of validity of any form of guarantee issued by the manufacturer and of the
statement of compliance according to the PED Directive 2006/42/CE.