5—Lubricate the outside of the main spring discs, insert.
6—Pull down on shock to release pressure and thread in shock adjuster. You
should be able to turn two full turns by hand before needing to use the
wrench.
7—Set the preload and sag as mentioned above.
8—Ride. A lot.
9
Shock Diagram
What They’re Called
1—Shock Boot
2—Shock Body
3—Supple Spring
4—Delrin Guide
5—Damper Discs (2 required for each shock)
6—Inner Sleeve
7—Center Bolt Washer
8—Center Bolt
9—Main Spring Discs (4 needed for each shock)
10—Bottom Out Bumper
11—O-Ring
12—Adjuster
