background image

The information in this publication is provided for reference and is believed to be

accurate and complete. Ibico is not liable for errors in this publication or for incidental or

consequential damage in connection with the furnishing or use of the information in this

publication, including, but not limited to, any implied warranty of fitness or merchantability for

any particular use.

Ibico reserves the right to make changes to this publication and to the products

described in it without notice. All specifications and information concerning products are

subject to change without notice.

Reference in this publication to information or products protected by copyright or

patent does not convey any license under the rights of Ibico or others. Ibico assumes no

liability arising from infringements of patents or any other rights of third parties.

This publication is copyrighted © 2002 by Ibico. All rights reserved. The information

contained in this publication  is proprietary and may not be reproduced, stored, transmitted, or

transferred, in whole or in part, in any form without the prior and express written permission

of Ibico. 

Ibico a company of GBC.

Summary of Contents for Patriot 12HR



















































































Reviews: