12
Torque
Description
1 – 6
For driving small
screws
6 - 11 For driving screws
into soft material
12 - 18 For driving screws
into soft and hard
material
19 - 23 For driving screws
into hard materials
For drilling in wood,
plastic and steel
Torque
Description
1 – 4
For driving small
screws
5 – 9
For driving screws
into soft material
10 - 14 For driving screws
into soft and hard
material
15 - 19 For driving screws
into hard materials
For drilling in wood,
plastic and steel
IBL SD 10-86|12-75
TORQUE ADJUSTMENT
It is possible to adjust the output torque settings (with a drill
mode setting).
The torque is adjusted by rotating the
mode adjustment ring (2). Torque is greater when the ring is set
on a higher setting and lower when set on a lower setting.
AUTOMATIC WORK LIGHT
Only for SD 10-86,
there is a work light which
will automatically illuminate by pressing the
ON/OFF switch (4). This helps to focus on the
work more thoroughly and could work on a not
much bright environment as well.
Work
Light
IBL SD10-86 IBL SD12-75
