13
Change the rotational direction from forward to reverse by
switching the forward/reverse rotation control (3).
1. Move the forward/reverse rotation control (3) to the left (as seen
from the operator position) in order to use the product in a
clockwise rotational mode.
2. Move the forward/reverse rotation control switch to the right (as
seen from the operator position) in order to use the product in
anticlockwise rotational mode.
3. Move the rotation control switch to the centre position to lock the
ON/OFF switch and avoid accidental starting.
FORWARD / REVERSE ROTATION CONTROL
WARNING!
Only change the rotational direction when the product
is switched OFF and has come to a complete stop! Always ensure that
the rotation switch is adjusted to the correct position depending on the
intended operation! Always slide the control as far as it will go! Do not
use the product with the control in any intermediate position!
IBL SD 10-86|12-75
Position
Application
Rotational
direction
Screw-driving
Screw removing
Lock the ON/OFF switch and avoid accidental starting
- 1 -
-
2
-
-
3
-
Drilling into material
Loosen drill bits
