10
This marble cutter is designed for light professional use; used
horizontally on a solid base and
it
should be used for wet
cutting mineral materials such as marble, granite, etc.
This can also be used for cutting other materials including wood,
metal etc., (light use only). The design allows good control over
the angle and the depth of reach at all times.
We can make a clean cut so that the end product needs a lesser
amount of finishing. By using the proper blade and this machine,
we can do the marble cutting in the least time.
It is a powerful and compact tool for cutting that works quite
precisely and fast. We can adjust the plate to make angled cuts as
well.
The cutting wheel has a position that gives the best reach to the
work piece and improves the efficiency of cutting. *We can
interchange the blades to suit different work pieces. The blade is
spindle mounted so we can fix and remove it fast.
(refer the assembly section below)
INTENDED USE
PRODUCT FUNCTIONS AND ASSEMBLY
To start the tool, simply press the
trigger switch (7). Tool speed is
increased by increasing pressure on the
switch trigger. For continuous operation,
press the lock on button (8) as well.
Release the trigger switch to stop.
ON/OFF TRIGGER SWITCH AND LOCK BUTTON
WARNING!
Before plugging in the tool, always check that the
switch trigger actuates properly and returns to the "OFF" position
when released.
7
8
IBL MC25-84
Summary of Contents for MC25-84
Page 1: ...MARBLE CUTTER MC25 84 ...
Page 2: ...1 ...
