
11
The use of thermal cover over the pool is essential for optimal functioning.
Always check the ideal pressure for each installation to avoid insufficiency
or excess flow.
Check if the collectors are properly fixed, because in case of strong wind or
storm, there may be detachment, generating possible leaks in the pipe joints,
or even the complete detachment of the roof or support.
The collector piping is resistant to degradation by the action of products used
in pool maintenance, such as chlorine. In the table below, the plate sizes for
the most common pool measurements are presented.
table below. In the case of large swimming pools, we ask that you contact the
factory to assist in dimensioning. We recommend that the installer leave the
plates level, so that the sealing of the joints is the best possible, remembering
that all plates are tested at the factory with water.
12
7.1.
Standard Installation System
The following is an example of the scheme for installing the entire pool heating
set, using a 2 x 5 m pool as a standard model, totaling an area of 10 m², where
the use of a battery with 5 (five) is indicated
VIBEA
2 X 1 collectors.
Motor pump