
2.
Solar collector
The
VIBEA
pool solar collectors have been developed to heat large volumes
of water with maximum savings. The solar collector is manufactured with
reliable, efficient products and preserving the environment, either by saving
energy or using clean materials and processes that are not aggressive to the
environment and people. The solar collector is manufactured with virgin raw
material (polypropylene) and has unique characteristics that are:
- Easy to install due to the use of joint at the ends;
- Resistant to working pressure up to 40 M.C.A (4.0 bar);
- Resistant to weather and chemicals contained in the pool water;
- Nontoxic raw materials;
- Large absorption area;
- No risk of corrosion.
VIBEA
solar heating collectors can be installed directly on a mounting surfa-
ce or on a raised device, and can be installed on the roof or on the floor, also
considering changes in inclination angles.
The operation of the collector is simple, through an electronic controller (not
supplied by
VIBEA
) the pump system is activated when there is sufficient
accumulated thermal energy, once this is done, the heating process starts
up to the chosen temperature. After reaching the temperature, the pool will
remain the same until there is no more energy to do so.
05
3.
Technical characteristics
4.
Observation points
The panels must be located as close as possible to the pool and its engine
room, in order to reduce heat losses and costs with interconnecting pipes.
06