IBEA VIBEA2x1 Manual Download Page 6

10

The 

VIBEA 

collector has a great advantage, which is to have a plate approxi-

mately 1 meter wide and not have the need to use o-rings and locks, since the 
collector was designed with joints in all its inputs and outputs, thus facilitating 
and optimizing their assembly time.

Make sure the roof is facing north so that the collectors receive the sun most 
of the day and have a better use.

An important factor in the installation of 

VIBEA

 solar collectors is related to 

the number of plates per battery, the best thing is not to exceed 21 m² of plate 
per battery, while taking into account the flow of the pump, as the distance 
to be taken must be considered from the engine room to the roof where the 
collectors will be installed. The number of plates per battery is specified in the 

Important points!

Always consider in case of swimming pools of gyms / physiotherapy clinics or 
even clubs, you should use an auxiliary heater. Always consult the factory in 
situations of large pools so that it can assist in a more adequate dimensioning.

6.

 

Sizing of the Pump

Knowing the size of your pool in square meters (m²) it is possible to dimension 
the motor pump and the hydraulic network pipe to be used.

Disclaimer:

Use an independent motor pump to install your solar collector.

To carry out the sizing of the motor pump and the proper piping for installation, 
it must be taken into account that the collector needs to have an excellent 
functioning, for this it is necessary to have a flow of 250 liters of water per 
m² of solar collector per hour, that is, , an example is an 18 m² swimming pool, 
4,500 liters of water are needed per hour considering that the collector is 
fixed on the roof, with these data pass your motor pump supplier the data 
below so that it analyzes the ideal pump and your pipe.

Tips!

- Keep the distance from the machine room to the roof where the solar  collector 
will be.
- Have the height of the roof in relation to the engine room.

- Always consider the correct piping to be installed for each system, as shown 
in the table below.

09

Summary of Contents for VIBEA2x1












Reviews: