BIOS SETUP
PIF Stage
The default setting is Disable.
BIU Power Mgmt
The default setting is Disable.
Memory Bank Alignment
The default setting is Auto.
Dynamic Clock
The default setting is Enable.
Auto Calibration
The default setting is Enable.
Auto DQS
The default setting is Disable.
Address Step Enable
The default setting is Auto.
Impedance Control
The default setting is Enable.
Add 10% Extra Current
The default setting is Disabled.
PCIE GFX Overclocking
The default setting is Disabled.
Power down unused GFX ports
The default setting is Enabled.
Power down unused GPP lanes
The default setting is Enabled.
PCIE CARD WORKROUND
The default setting is Enabled.
GFX Link Width
The default setting is x16.
34
MB879 User’s Manual
Summary of Contents for MB879
