INSTALLATIONS
Installing the CPU
The MB879 board supports a Socket 479 processor socket for Intel
®
Pentium
®
M or Celeron
®
M processors.
The processor socket comes with a screw to secure the processor. As
shown in the left picture below, loosen the screw first before inserting
the processor. Place the processor into the socket by making sure the
notch on the corner of the CPU corresponds with the notch on the
inside of the socket. Once the processor has slide into the socket,
fasten the screw. Refer to the figures below.
NOTE
: Ensure that the CPU heat sink and the CPU top surface are
in total contact to avoid CPU overheating problem that
would cause your system to hang or be unstable.
6
MB879 User’s Manual
Summary of Contents for MB879
