IBASE Technology IB905, User Manual, Page: 42 / 63

BIOS SETUP
38 IB905 User’s Manual
LCD Control
Aptio Setup Utility
Main Advanced
Chipset
Boot Security Save & Exit
LCD Control
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save & Exit
ESC: Exit
Primary IGFX Boot Display VBIOS Default
LCD Panel Type VBIOS Default
SDVO-LFP Panel Type VBIOS Default
Panel Color Depth 18 Bit
LVDS BLON Control [3.3V]
Panel Scaling Auto
Spread Spectrum clock Chip Off
TV1 Standard VBIOS Default
TV2 Standard VBIOS Default
ALS Support Enabled
Active LFP No LVDS
Primary IGFX Boot Display
Select the Video Device that will be activated during PoST. This has no
effect if external graphics present.
Secondary boot display selection will appear based on your selection.
VGA modes will be supported only on primary display.
Active LFP
Select the Active LFP Configuration.
No LVDS: VBIOS does not enable LVDS.
Int-LVDS: VBIOS enables LVDS driver by Integrated encoder.
SDVO LVDS: VBIOS enables LVDS driver by SDVO encoder.
eDP Port-A: LFP Driven by Int-DisplayPort encoder from Port-A.
Panel Color Depth
Select the LFP Panel Color Depth: 18 Bit, 24 Bit.
LVDS BLON Control
Select the LFP Panel Inverted voltage: 3.3V, 5V.
LCD Panel Type
Select LCD panel used by Internal Graphics Device by selecting the
appropriate setup item: 640x480 LVDS ~ 2048x1536 LVDS.
SDVO-LFP Panel Type
Select SDVO panel used by Internal Graphics Device by selecting the
appropriate setup item: VBIOS Default, 1024x768 ~ 1600x1200.