INSTALLATIONS
8
IB800 User’s Manual
Installing the Memory (DIMM)
The IB800 CPU Card supports three 168-pin DIMM sockets for a
maximum total memory of 3GB in SDRAM type. The memory module
capacities supported are 32MB, 64MB, 128MB, 256MB, 512MB and
1GB.
Installing and Removing DIMMs
To install the DIMM, locate the memory slot on the CPU card and
perform the following steps:
1. Hold the DIMM so that the two keys of the DIMM align with those on
the memory slot.
2. Gently push the DIMM in an upright position until the clips of the slot
close to hold the DIMM in place when the DIMM touches the bottom
of the slot.
3. To remove the DIMM, press the clips with both hands.
Top View of DIMM Socket
DIMM
Lock
Lock
Lock
Lock
Summary of Contents for IB800
Page 1: ...IB800 Full Size Socket 478 Pentium 4 Intel 845 CPU Card USER S MANUAL Version 1 0B...
Page 4: ...iv IB800 User s Manual This page is intentionally left blank...
Page 8: ...INTRODUCTION 4 IB800 User s Manual Board Dimensions...
Page 76: ...APPENDIX 72 IB800 User s Manual This page is intentionally left blank...