![background image](http://html1.mh-extra.com/html/ibase-technology/ib800/ib800_user-manual_3237249050.webp)
BIOS SETUP
46
IB800 User’s Manual
PNP/PCI Configurations
This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
CMOS Setup Utility – Copyright © 1984-2001 Award Software
PnP/PCI Configurations
PNP OS Install
No
ITEM HELP
Reset Configuration Data
Disabled
Resources Controlled By
Auto (ESCD)
IRQ Resources
Press Enter
DMA Resources
Press Enter
PCI/VGA Palette Snoop
Disabled
Menu Level
Default is Disabled.
Select Enabled to
reset Extended
System Configuration
Data (ESCD) when you
exit Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
PNP OS Install
Enable the PNP OS Install option if it is supported by the operating
system installed. The default value is
No
.
Reset Configuration Data
This field allows you to determine whether to reset the configuration data
or not. The default value is
Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically with the use of a use a PnP operating system such as
Windows 95.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly.
This field allows you to set whether or not MPEG ISA/VESA VGA cards
can work with PCI/VGA. When this field is enabled, a PCI/VGA can
work with an MPEG ISA/VESA VGA card. When this field is disabled, a
PCI/VGA cannot work with an MPEG ISA/VESA card.
Summary of Contents for IB800
Page 1: ...IB800 Full Size Socket 478 Pentium 4 Intel 845 CPU Card USER S MANUAL Version 1 0B...
Page 4: ...iv IB800 User s Manual This page is intentionally left blank...
Page 8: ...INTRODUCTION 4 IB800 User s Manual Board Dimensions...
Page 76: ...APPENDIX 72 IB800 User s Manual This page is intentionally left blank...