![background image](http://html1.mh-extra.com/html/ibase-technology/ib800/ib800_user-manual_3237249044.webp)
BIOS SETUP
40
IB800 User’s Manual
Integrated Peripherals
This section sets configurations for your hard disk and other integrated
peripherals.
CMOS Setup Utility – Copyright © 1984-2001 Award Software
Integrated Peripherals
On-Chip Primary PCI IDE
Enabled
ITEM HELP
IDE Primary Master PIO
Auto
Menu Level
IDE Primary Slave PIO
Auto
IDE Primary Master UDMA
Auto
IDE Primary Slave UDMA
Auto
On-Chip Secondary PCI IDE
Enabled
IDE Secondary Master PIO
Auto
IDE Secondary Slave PIO
Auto
IDE Secondary Master UDMA
Auto
IDE Secondary Slave UDMA
Auto
USB Controller
Enabled
USB Keyboard Support
Disabled
AC97 Audio
Auto
Init Display First
PCI Slot
IDE HDD Block Mode
Enabled
POWER ON Function
BUTTON Only
Onboard FDC Controller
Enabled
Onboard Serial Port 1
3F8/IRQ4
Onboard Serial Port 2
2F8/IRQ3
UART Mode Select
Normal
UR2 Duplex Mode
Half
Onboard Parallel Port
378/IRQ7
Parallel Port Mode
SPP
ECP Mode Use DMA
3
PWRON After PWR-Fail
Off
Midi Port Address
330
Midi Port IRQ
10
OnChip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with
support for two IDE channels. Select
Enabled
to activate each channel
separately.
IDE Primary/Secondary Master/Slave PIO
These fields allow your system hard disk controller to work faster. Rather
than have the BIOS issue a series of commands that transfer to or from the
disk drive, PIO (Programmed Input/Output) allows the BIOS to
communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select the
best available mode.
Summary of Contents for IB800
Page 1: ...IB800 Full Size Socket 478 Pentium 4 Intel 845 CPU Card USER S MANUAL Version 1 0B...
Page 4: ...iv IB800 User s Manual This page is intentionally left blank...
Page 8: ...INTRODUCTION 4 IB800 User s Manual Board Dimensions...
Page 76: ...APPENDIX 72 IB800 User s Manual This page is intentionally left blank...