BIOS SETUP
26
ET910 User’s Manual
On-Chip Serial ATA Setting
The fields under the SATA setting include On-Chip Serial ATA (Auto),
PATA IDE Mode (Secondary), PATA IDE Speed Settings, and SATA
Port (PO, P2 is Primary).
USB Controller
The options for this field are
Enabled
and
Disabled
. By default, this field
is set to
Enabled
.
USB 2.0 Controller
The options for this field are
Enabled
and
Disabled
. By default, this field
is set to
Enabled
. In order to use USB 2.0, necessary OS drivers must be
installed first.
Please update your system to Windows 2000 SP4 or
Windows XP SP2.
USB Keyboard Support
The options for this field are
Enabled
and
Disabled
. By default, this field
is set to
Disabled
.
AC97 Audio Select
This field, by default, is set to
Auto
.
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and
their addresses. The default values for these ports are:
Serial Port 1
3F8/IRQ4
Serial Port 2
2F8/IRQ3
Parallel Port
378H/IRQ7
UART Mode Select
This field determines the UART 2 mode in your computer. The default
value is
Normal
. Other options include
IrDA
and
ASKIR
.
Parallel Port Mode
This field allows you to determine parallel port mode function.
SPP
Standard Printer Port
EPP
Enhanced Parallel Port
ECP
Extended Capabilities Port
ECP+EPP
Combination of
ECP and EPP capabilities
Normal
Normal function
Summary of Contents for ET910
