![background image](http://html1.mh-extra.com/html/ibase-technology/csb200-818/csb200-818_user-manual_3239969017.webp)
Hardware Configuration
CSB200-818 User Manual
9
2
2.1 Installation / Replacement
Before installations, you need to turn your device upside down and remove
the bottom chassis base by removing 6 screws as indicated below.
2.1.1
Memory Installation / Replacement
If you need to install or replace a memory module, you will have to remove the
interior plate carrying a small PCB with I/O module locating above the memory
slot as shown below. Follow the instructions to remove the plate.
1.
Loosen the 3 screws to free up interior plate.
2.
Take out the interior plate along with the small PCB and I/O module
carefully.
3.
Align the key of your memory module with that on the memory slot and
insert the module slantwise.