12
CSB200-818 User Manual
2.1.5
Mounting Installation
Requirements
Before mounting the system, ensure that you have enough room for the power
adaptor and signal cable routing, and have good ventilation for the power
adaptor. The method of mounting must be able to support weight of the
product plus the weight of the suspending cables attached to the system. Use
the following methods for mounting your system:
Wall Mounting Installation
1.
Attach the mounting kit (2 brackets) to the your product, and secure with
the supplied four screws as below.
2.
Then prepare at least four screws (M3, 6 mm) to mount the device on
wall .
2.2 Pinout for DC Power Input Connector
•
DC Power Input (terminal block)
Pin Assigment
Pin
Assigment
1
GND
3
+12V
2
Chassis GND
1
3
