51
1.
MAC Address Control
:
Check “Enable” to enable the “MAC Address Control”. All of
the settings in this page will take effect only when “Enable” is checked.
2.
Connection control
: Check "Connection control" to enable the controlling of which
wired and wireless clients can connect with this device. If a client is denied to connect
with this device, it means the client can't access to the Internet either. Choose "allow"
or "deny" to allow or deny the clients, whose MAC addresses are not in the "Control
table" (please see below), to connect with this device.
3.
Association control
: Check "Association control" to enable the controlling of
Which wireless client can associate to the wireless LAN. If a client is denied to
associate to the wireless LAN, it means the client can't send or receive any data via
this device. Choose "allow" or "deny" to allow or deny the clients, whose MAC
addresses are not in the "Control table", to associate to the wireless LAN.
Afterwards,
click on “Save” to store your settings.
3.2.1.5.
Security Tools
1.
MAC Address for Wake-on-LAN
2.
Discard PING from WAN side
: When this feature is enabled, any host on the WAN
cannot ping this product.
3.
DoS Attack Detection
: When this feature is enabled, the router will detect and log the
DoS attack coming from the Internet. Currently, the router can detect the following
DoS attack: SYN Attack, Port Scan, Ping of Death, Land Attack etc.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the changes.
Summary of Contents for iB-WRC300N
Page 1: ...1 300M MIMO ADSL2 Broadband Router Model No iB WRC300N User Manual Ver 1 0 0...
Page 11: ...11 Step 2 Select Language then click Next to continue Step 3 Then click the Wizard to continue...
Page 12: ...12 Step 4 Click Next to continue Step 5 Select Wireless Enable and then click Next to continue...
Page 22: ...22 3 1 Basic Network Status Info Note You can see all the status of this Router on Status page...
