31
9.
Data Encapsulation:
Vc-MUX and LLC, these two options depend on your
ISP setting. (LLC is default as configured)
10.
VPI and VCI, Schedule Type:
these values depend on your ISP setting.
11.
Schedule type
: UBR / CBR / VBR / GFR, depend on your ISP setting.
12.
Multicast:
you may enable as auto mode or select by IGMP v1, IGMP v2, and
IGMP v3.
13.
IGMP Snooping:
enable or disable IGMP snooping function.
14.
VLAN TAG:
you may input the value of VLAN Tag by your ISP setting.
(Range : 1~4094)
Ethernet WAN
A. Dynamic IP Address
1.
Activate WAN for Auto-Failover
: With this function enabled, when the
2.
Host Name
: Optional, required by some ISPs, for example, iB-WRC300N.
3.
ISP registered MAC Address:
Enter MAC address of your ISP. (Optional)
4.
Connection Control
: Connect-on-demand is the device will link up with ISP
when the clients send outgoing packets. Auto Reconnect (Always-on) is the
device will link with ISP until the connection is established. Manually mode is
the device will not make the link until someone clicks the connect-button in the
Status-page.
Summary of Contents for iB-WRC300N
Page 1: ...1 300M MIMO ADSL2 Broadband Router Model No iB WRC300N User Manual Ver 1 0 0...
Page 11: ...11 Step 2 Select Language then click Next to continue Step 3 Then click the Wizard to continue...
Page 12: ...12 Step 4 Click Next to continue Step 5 Select Wireless Enable and then click Next to continue...
Page 22: ...22 3 1 Basic Network Status Info Note You can see all the status of this Router on Status page...
