46
2.1.4
Routing
2.1.4.1 Static Routing Table
If you have more than one routers and subnets, you will need to enable routing table to
allow packets to find proper routing path and allow different subnets to communicate with
each other. The routing table allows you to determine which physical interface addresses
are utilized for outgoing IP data grams.
1.
Dynamic Routing
: Routing Information Protocol (RIP) will exchange information
about destinations for computing routes throughout the network. Please select RIPv2
only if you have different subnets in your network. Otherwise, please select RIPv1 if
you need this protocol.
2.
Static Routing
: For static routing, you can specify up to 8 routing rules. You can enter
the
destination IP address
,
subnet mask
,
gateway
, and
hop
for each routing rule,
and then enable or disable the rule by checking or un-checking the Enable checkbox.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the changes.
Summary of Contents for iB-WRC300N
Page 1: ...1 300M MIMO ADSL2 Broadband Router Model No iB WRC300N User Manual Ver 1 0 0...
Page 11: ...11 Step 2 Select Language then click Next to continue Step 3 Then click the Wizard to continue...
Page 12: ...12 Step 4 Click Next to continue Step 5 Select Wireless Enable and then click Next to continue...
Page 22: ...22 3 1 Basic Network Status Info Note You can see all the status of this Router on Status page...
