7
C. Installation Steps for 3G Connection
Step 1. Plug in power:
Connect with the power adapter to the receptor on the
back panel of it. Then the device will be powered on.
Step 2. Set WAN mode switch:
Set WAN mode switch at “3G” side.
Step 3. Connect with a USB 3G modem:
Plug your USB modem which is with activated SIM
card provided by your 3G service provider.
Step 4. Connect with Ethernet Cable
Insert the Ethernet cable into RJ45 Ethernet Port on
the back panel. And then plug the other end of RJ45
into the computer or Laptop computer.
Step 5. Start to configure the device:
You can start to configure the device via the Easy
Setup Utility.
(see Easy Setup Utility in CD)
