20
3.1 Network Setting
3.1.1. LAN (Wi-Fi) & WAN - Network Setup
1.
LAN IP Address: The local IP address of this device. The computers on your network
must use the LAN IP address of this device as their default gateway. You can change it if
necessary.
2.
Subnet Mask: Input your Subnet mask. (All devices in the network must have the same
subnet mask.) The default subnet mask is 255.255.255.0.
3.
WAN Interface: This shows Ethernet WAN or Wireless WAN according to WAN mode
switch on the device.
4.
WAN Type: If WAN mode switch is set to “3G”, you can see 3G, iBurst, Wi-Fi HotSpot
options from the drop-down list. Otherwise, if WAN mode switch is set to “DSL”, there
will be Dynamic / Static IP address, PPP over Ethernet (PPPoE), for WAN options.
