32
The following table describes the parameters of this page:
Field
Description
DHCP Mode
If set to
DHCP Server
, the router can assign IP
addresses, IP default gateway and DNS Servers to
the host in Windows95, Windows NT and other
operation systems that support the DHCP client.
IP Pool Range
It specifies the first and the last IP address in the IP
address pool. The router assigns the IP address in
the IP pool range to the host.
Show Client
Click it, the
Active DHCP Client Table
appears. It
shows IP addresses assigned to clients.
Default Gateway
Enter the default gateway of the IP address pool.
Max Lease Time
The lease time determines the period that the host
retains the assigned IP addresses before the IP
addresses change.
Domain Name
Enter the domain name if you know. If you leave this
blank, the domain name obtained by DHCP from the
ISP is used. You must enter host name (system
name) on each individual PC. The domain name can
be assigned from the router through the DHCP
server.
DNS Servers
You can configure the DNS server IP addresses for
DNS Relay.
Set VendorClass
IP Range
Click it, the
Device IP Range Table
page appears.
You can configure the IP address range based on the
device type.
Click
Show Client
in the
DHCP Mode
page, the page shown in the following figure
appears. You can view the IP address assigned to each DHCP client.
Summary of Contents for DWA-N150U Series
