ibaPADU-8AI-U/-8AI-I
Manual
Issue 1.6
25
9.1.3
Padu 8/-I – “Analog“ tab
Figure 7: Padu 8 – „Analog“ tab
Name
Assign a meaningful name to each signal and you can enter additionally two com-
ments when clicking on the symbol in the field “Name”.
Unit
Here, you can enter the physical unit of the analog value, default value is “V”.
Min
You can define a lower limit for the measuring range. The analog normalized value
of -10 V is assigned to a physical value, e. g. -100 V.
Max
Here, you can define an upper limit for the measuring range. The analog normal-
ized value of +10 V is assigned to a physical value, e. g. +100 V.
Active
The signal will be measured when active.
Actual
Displays the actual value of the signal (only available when the measurement is al-
ready running with the specified configuration).
Further columns can be shown or hidden by using the context menu (right mouse
click in the table header).
