- 20 -
4.3.
AP Mode (Activate Wi-Fi module
)
a)
Press
for 10 seconds after screen unlock,
will be flashing slowly
to enter Wi-Fi binding status.
b)
Click "Add device", follow instructions below to finish binding.
display on the screen once Wi-Fi connection success.
Note:
If it doesn't jump automatically, click "Confirm hotspot connection,
next".
4.4. If connect fails, please make sure your network name and password is
correct. And your router, mobile phone and device are as close as
possible.
4.5.
Wi-Fi rebinding (When Wi-Fi password changes or network
configuration changes)
Press
for 10 seconds,
will be flashing slowly for 60 seconds.
Then
will be off. The original binding will be removed. Follow step
above for rebinding.
Remarks: Please make sure the router is configured at 2.4GHz.