TRU 650 ACCESS CONTROL SYSTEM USERS GUIDE
Copyrighted by Integrated Biometrics Inc., 2008
- 10 -
1.4.2.4 Next, click on the “Add” Icon. There is a prompt field at the bottom of this window. The
prompt will instruct to “Scan your finger.” Place your finger on the USB enrollment sensor. The
prompt will then instruct you to “Remove your finger.” Take your finger off the sensor. This
prompt will instruct you three times to Scan, and then remove, to obtain three images.
1.4.2.5 At this point the prompt will read “Fingerprint capture succeeded” or
“Fingerprint capture failed.” If it reads “Succeeded”, you can exit this screen by clicking “OK”, or
proceed to add another fingerprint image, for a different finger, by clicking on that finger and
repeating this process. If it reads “Failed”, you can attempt enrollment of the same finger again, or
try a different finger. It is recommended to enroll at least two fingers per user, one from each hand.
1.4.1.6 After successful fingerprint enrollment you may exit this window by clicking “OK” or
select one of the other tabs in this window. If you choose to exit this window you MUST click
“OK” to save inputted information.
NOTE: IT IS RECOMMENDED TO CHECK THE BOX
TO STORE THE USERS FINGERPRINT IN THE DATABASE!
This is very useful for
troubleshooting poor quality enrollments.
1.4.2.7 After successful enrollment, the section on the right of this screen “List of Finger Prints”,
will list all enrolled fingers for this User. There are two functions that can be set in this section.
1.4.2.8 The first function is to designate as an Alarm Finger, or not. Highlight the desired
enrollment finger by clicking on that line, example shown – R2. If there is an “X” in the “Alarm”
box, it designates this finger is “NOT” set as an alarm finger. Right Click on this line. You will
receive three options. We will address alarm option “Set to Alarm Finger” first. If you click on this
option it will set this finger, when used, to trigger the Alarm that your System Administrator
configures. When you designate as Alarm Finger with this option, there will be an “O” in the alarm
field. You disarm this finger from the Alarm function by the same process.
1.4.2.9 Next, with the desired enrollment finger highlighted, right click. This time choose the
function “Set to Download.” The default for this function sets all fingers enrolled to download.
This setting is shown with an “O” in the download column. If for some reason the TRU looses
Network connection, the selected finger enrollments that have been downloaded will still be able
to be used. They are downloaded to the memory in the TRU itself. It is recommended to set only
one finger to download, as memory in the TRU is limited. Authentication Time will increase with
the number of templates stored. Set with an “X”, in this column, finger enrollments are
not to be downloaded.
