MAN-043/B
22
Section 3 - USE OF THE ENGINE
3.1 CHARGING OF THE OIL IN THE GEARBOX
ATTENTION:
The engine is suplied without oil in the gear box. Before starting the engine fill
the box with SAE 30 oil.
Starting the engine with a dry box will damage the gears beyond repair
- Charge of the gear box:
Put the engine in horizontal position, unscrew
the oil plug (n°1 on the picture), and oil level
plug (n°2 on the picture), fill with oil until it
comes out from the oil level plug (appr. 40cc
of oil).
Use a SAE 30 motor oil.
- Check the oil level
Put the engine in horizontal position and
unscrew the oil level plug.
If the level is correct you should see a light
outcome of oil, otherwise top up.
- Discharge the oil
Unscrew the oil level plug and loosen the
charge plug. Tilt the engine to discharge the
oil through the oil level plug.
3.2 GASOLINE AND OIL
Use leaded or unleaded Premium gasoline (92 RON + MON), mixed with oil at 4%
(25:1).
2
Use oils containing Castor Oil which guarantees an optimized lubrication at high
temperature.
As on the other hand, use of Castor Oils creates gummy residues which give origin to
carbon deposits, it is necessary to check and clean, at least every 5 ÷10 hours, the
piston and the head.
Our experience dictates use of oils, such as:
SHELL ADVANCE RACING M
ELF HTX 909
ERG K KART FORMULA
Once the fuel tank is filled, make sure that the gasoline reaches the carburetor before
starting the engine.
Never use the electric starter to suck the gasoline as this could discharge the battery.
SUGGESTION:
Disconnect the plastic tube on the carb. and the vent tube on the tank and
pressurize the vent tube, until the gasoline comes out from the tube on the
carb. Make sure that there is no air in the tube. Connect the tube on the carb.
and on the vent.
2
1
Summary of Contents for Parilla x30 125cc RL-TaG
Page 1: ...MAN 043 B ASSEMBLY INSTRUCTIONS USER MANUAL 20 10 11...
Page 34: ...MAN 043 B 32...
Page 47: ...MAN 043 B 45...
