1. Specifications Check
42
1.3 Options
1.3.1
Brake Type (Model : B)
The brake is a mechanism designed to prevent the slider from dropping on a vertically installed actuator
when the power or servo is turned OFF.
Use the brake to prevent the installed load, etc., from being damaged due to the falling slider.
1.3.2
Reversed-home Specification (Model : NM)
The standard home position is on the motor side. However, the motor position will be reversed if it is
desirable in view of the layout of the system, etc.
(Note) The home position is adjusted at the factory before shipment. If you wish to change the home
after the delivery of your actuator, you must return the actuator to IAI for adjustment.
1.3.3
Cable Eject Direction Changed (Model No. : CJT, CJR, CJL, CJB, CJO)
If a change in the cable ejection direction is made, the direction of cable ejection will be changed.
There are ejection directions, top (model code: CJT), right (model code: CJR), left (model code: CJL),
bottom (model code: CJB) and outward (model code: CJO). CJO can be selected only in SA4R, SA6R
and SA7R.
1.3.4
Motor Left Reversed, Motor Right Reversed (Model No. : ML, MR)
From the view of motor side, reversing to the left is ML and reversing to the right is MR.
ML
Left Reversed
MR
Right Reversed
