background image

2

Dear Customer,

We thank you and  congratulate you on granting us your preference, by purchasing one of our products. 
We are sure that this new appliance, manufactured with quality materials, will meet your requirements in 
the best possible way.
The use of this new equipment is easy. However, we invite you to read this booklet carefully, before 
installing and using the appliance. This booklet gives the right information on the installation, use and 
maintenance, as well useful advice.
 

 

 

 

 

 

 

THE MANUFACTURER

This appliance complies with the following Directives: 

EEC 90/396 (Gas)    

 

 

EEC 89/336 (Electromagnetic Compatibility) 

EEC 73/23 e 93/68 (Low Voltage)  

 

EEC 89/109 (Contact with foods)

The installation must be carried out by authorised personnel, in conformity with the regulations in force.
This equipment has been designed to be used by adults.
Therefore, make sure that children do not go near the equipment to play with it.
This appliance is not intended for use by young children or infirm persons unless they have been 
adequately supervised by a responsible person to ensure that they can use the appliance safely.
Before powering the equipment, check that it is properly adjusted for the type of gas at disposal (see the 
“installation” paragraph).
Before carrying out the maintenance or cleaning the equipment, cut power supply off and make it cool 
down.
Make sure that air circulates around the gas equipment. Insufficient ventilation produces a lack of oxygen.
In case of an intense or prolonged use of the equipment, it may be necessary to improve aeration, for 
example by opening a window or increasing the mechanical suction power, if it exists.
The products of combustion must be discharged outside through a suction hood or an electric fan (see the 
“installation” paragraph).
For any possible operation or modification, apply to an authorized Technical Assistance Centre and 
demand original spare parts.
Where this appliance is installed in marine craft or in caravans, it shall not be used as a space heater.

Servicing shall be carried out only by authorised personnel.
The product label, with the serial number, is sticked under the hob.

The manufacturer refuses all responsibility for possible damages to things or people, resulting 
from a wrong installation or from an improper, incorrect or unreasonable use of this equipment.

-
-
-
-

-

-

-
-

-

-

-

GENERAL NOTICE

We invite you to read this instruction booklet carefully, before installing and using the equipment. 

It is very important that you keep this booklet together with the equipment for any future 

consultation.

If this equipment should be sold or transferred to another person, make sure that the new 

user receives the booklet, so that he can learn how to operate the appliance and read the 

corresponding notice.

This is a Class 3 appliance.

Summary of Contents for ICD6SG3









Reviews: