15
Operating the remote control
After you have paired the remote control with the ceiling fan, you can now use the
remote control.
To "activate" the remote control, you must always press the central control knob first.
Then all the displays of the function keys appear for about 5 seconds. Within these 5
seconds, you can activate one of the functions by simply touching it. After you have
"activated" a function, the other two function displays go out. By turning the central
control knob, you can determine the desired power level. These are, related to the
respective sensor buttons:
Motor:
10 power levels max. / 1 power level per LED segment
Timer
50 minutes automatic overrun max. / 5 minutes per LED segment
Light function10 dimming levels max. / 1 dimming level per LED segment
After you have selected the power level, all the indicators on the remote control go out
after 5 seconds.
To reactivate the remote control, you must first press the central control knob again.
The displays of the function keys then appear for 5 seconds. If you now tap/touch or
activate a function key that has already been activated, the LED segment display
shows the last power level saved. You can change the power level again by turning
the central control knob again or switch off the function by tapping/touching the function
key again.
Note that you always have to press the central control knob first to be able to select /
activate the function keys. Switching from one function key to another also inevitably
requires pressing the central operating toggle.
Attention: When setting the maximum reading level of the motor (level 10), a timer time
/ automatic run-on setting is not possible.
