29
Workmaster End Panel
Item
Description
Qty
1
Pedestal End Panel
1
HARDWARE KIT HWR061
A
Screw #14AB x .625 SMS PPH BLACK
3
B
Screw #10 x .375 PPH BLACK
2
Step 1:
Install the end panel into the pedestal by angling it between the pedestal leg tubes and the pedestal bottom
support fitting the bottom flange of the end panel to the inside of the bench pedestal. Push the top of the end
panel against the pedestal top support and attach the top flange of the end panel to the worksurface using
three #14AB x .625 phillips head wood screws.
Step 2:
From the inside of the pedestal push the end panel against the pedestal bottom support and using the holes
in the end panel as a template drill two 3/16” diameter holes into the pedestal bottom support. Attach the end
panel to the bottom support using two #10 x.373 self-taping phillips screws.
